With advances in technology in modern day Telecommunications, over a period of time, it became very important to upgrade the HDPE PLB pipes to be used particularly for Telecom applications. The Optical Fibre Cables used for Telecommunications being very delicate and sensitive, it became necessary to modify the HDPE Pipes to be used as conduits for optical fibre cables.
These HDPE PLB Pipe conform to international standards and are exported worldwide. We also offer all type of couplers, end plugs, and other accessories. The sizes of HDPE PLB Pipe, available ranges from 32mm, 40mm, 50mm, 63mm OD and also higher sizes as per requirements.
PLB HDPE duct consists of two concentric layers, the outer layer being HDPE; co-extruded with an inner layer of solid silicone permanent lubricant, to reduce the internal co-efficient of friction (ICF). We are manufacturing in such a manner so that the lubricant shall become a solid layer of uniform thickness throughout the duct so formulated to provide a permanent, low friction boundary layer between the inner surface of the duct and Optic Fiber Cable. The lubricant layer is clearly visible in cross section, concentric with the outer layer. The ducts contain 4 (four) equispaced continuous longitudinal strips of width 3mm minimum which is co-extruded during the duct manufacturing. With the support of our highly experienced and skilled workforce, we are renowned as one of the well equipped manufacturers & suppliers of PLB HDPE Pipe And Accessories. These pipes are developed as per industrial standards using quality tested raw materials. Available in different sizes, these pipes are known for their smooth finish, durability and longer life. Our developed PLB HDPE Pipe And Accessories are commonly used for computer networking, telecommunications and railways information network.
Visit Here, For More Information on HDPE PLB Telecom Ducts and on Sunbond Aluminium Composite Panel also know about HDPE PLB Pipe Manufacturer/Exporter.
PLB HDPE duct consists of two concentric layers, the outer layer being HDPE; co-extruded with an inner layer of solid silicone permanent lubricant, to reduce the internal co-efficient of friction (ICF). We are manufacturing in such a manner so that the lubricant shall become a solid layer of uniform thickness throughout the duct so formulated to provide a permanent, low friction boundary layer between the inner surface of the duct and Optic Fiber Cable. The lubricant layer is clearly visible in cross section, concentric with the outer layer. The ducts contain 4 (four) equispaced continuous longitudinal strips of width 3mm minimum which is co-extruded during the duct manufacturing. With the support of our highly experienced and skilled workforce, we are renowned as one of the well equipped manufacturers & suppliers of PLB HDPE Pipe And Accessories. These pipes are developed as per industrial standards using quality tested raw materials. Available in different sizes, these pipes are known for their smooth finish, durability and longer life. Our developed PLB HDPE Pipe And Accessories are commonly used for computer networking, telecommunications and railways information network.
SALIENT FEATURES
Impact Resistance. Environment Stress Crack Resistance (ESCR). Temperature Resistance & Range of Product use. Crush Resistance. Ultraviolet (UV) protection.APPLICATION
Suitable for installation in the field dirt trenches, under sidewalks, roads, within communication networks, between communication centers and between cities. Can also be used in branch networks between cells, distribution cabinets, poles, in walls and within subterranean networks of homes, allowing the insertion of communication cables-optical or copper, as well as TV/cable aluminum coaxial cables. Cables can be inserted in through the pipe by blowing, with an internal air-pressure up to eight bars.ADVANTAGES :
Reduction of stress on cable during installation. Installation of Longer lengths made feasible. Negotiations of cable movement through bends and deflections are easier. Reduction of number of joints and minimizes number of splices. Faster and easy installation of cable with lesser man power. Reduction of overall cost of installation, maintenance and future upgrades. Retains it's properties throughout it's life. Existing cables can be deployed after de-blowing from the duct. This does not have toxic and dermatic hazards and is safe handling. Faster and Easy Installation of cable with lesser manpower Feasibility of longer lengths installation Reduction in installation cost, Maintenance and future upgradation Easy movement of cable through bends Reduction in number of joints due to longer lengths of pipes. The pipes are non toxic in nature and hence safe to handle Existing cables can be deployed after de blowing from the duct.Visit Here, For More Information on HDPE PLB Telecom Ducts and on Sunbond Aluminium Composite Panel also know about HDPE PLB Pipe Manufacturer/Exporter.
